So I'm on a mission, to make it happen! First stage of this project was to go out and buy wicker chairs from Pier 1 along with the cute cushions. Now I need to work on a coffee table!!!
I took a trip to home depot and joann fabric to get what i needed. I have posted a few pics for you!
This is what I came home with
* half sheet of plywood
* 4 wood legs
* foam cushion
* brackets
* staple gun
*glue
Instead of just screwing the legs into the wood, I got brackets. You can find these where the legs are in the hardware store.
attached them to the corners of the plywood, leave a gap so you can staple fabric under the wood to
the foam I used is 5 inches thick and I doubled it so that it was 10 inches thick. Cut the foam to size with knife and glue the two pieces together, one on top of the other.
The fabric I used is outdoor fabric from Joann's, I used just under a yard.
I then pulled the fabric and stapled it to the wood.
and this it what it looks like after all sides are stapled down.
I'm going to add trim to hide the staples and I'll be painting the legs.
As soon as it's finished I'll post pictures!!
No comments:
Post a Comment